80070 配件箱将 FT-IR 采样配件保持在介于 MIR 8035™ 扫描仪和探测器之间的适当光学高度。可用于任意 MIR 8035 探测器。为使系统完整，在扫描仪的输入端需要 80007 碳化硅光源、80009 QTH 灯光源或您自己的光源。
The 80033 IR Fiber Coupler with the 80041 Fiber Adapter installed.
我们提供离轴抛物面镜作为 MIR8035TM 光源和探测器的一部分，用作独立的聚光光学元件。
The 80033 is an ideal choice when transitioning from a collimated beam of light into a fiber (or visa versa) when working in the infrared. Its 1.5-Inch Series female flange is compatible with a variety of products, including the Oriel FT-IR Spectrometer Modular solution. An off-axis parabolic reflector is integrated into the design, rather than a condenser lens. IR refractive optics are expensive and have transmittance limitations. Using this type of reflector provides several advantages. Its gold coating enhances IR reflectance. The focal point is displaced from the mechanical axis, giving full access to the reflector focus area. There is no shadowing with the fiber positioned at the focal point. An advantage of the 80033 is that it can accept a variety of fiber terminations. Simply select the appropriate fiber adapter, screw it into place, connect the fiber and adjust its position along the X-Y axis for maximum throughput. Interchangeable fiber adapters are available for SMA, ST and 11 mm ferrule terminations (ordered separately). This type of reflector provides very efficient radiation control because collection or focus occurs over very large solid angles. This makes the 80033 particularly useful with lower power incoherent sources, such as the 80007 Silicon Carbide or 80009 QTH infrared sources.